6m x 3m

Popular for canal work

 

Popular with canal and river work because

1) It is the smallest pontoon you can work from at height. It is suitable for a raised scaffold platform or a Monkey Tower to give reach heights up to 4m.

2) It is narrow enough to launch on small slipways and light enough to lift with a lorry mounted HIAB.

3) At 3m wide it can be used on a narrow canal or river that is navigable and not block the waterway. 

Size

LOA 6m
Beam 3m
Draft (Lightships) 0.2m
Freeboard (Lightships) 0.6m
Deck Area  18m2
Self Weight  1.44t

Payload

Floats Size 0.5m³
Float Qty 12
Total Buoyancy 6m³
Waterplane Area 8.78m²
Kg per cm immersion 878kg
Displacement Lightships 1.44m³
Max Displacement 3.72m³
Max Payload 2.28t

Specification

Handrails Double handrails & kickboards
Crane Lift Points Yes
Mooring Cleats 4x heavy duty cleats
Mooring Lines 4x 4m, 4x 8m
Deck Heavy duty wood
Sea fastenings 4x hooks @200kg each
Fenders x12
Access 2x hinged gates

Note: Above are indicative guidelines. Specific limits will be set for each project based on operating environment, load type, activity and the RAMS for that project.

Propulsion

A 20 or 30 hp outboard mounted in one of our small engine frames and controlled by a clip-on console with steering and throttle gives a service speed of around 4 knots. Alternatively we can supply a separate safety/work boat to manoeuvre it into position.

Safety pack

Item Details
Lifebuoys Under 24m x 2. Under 24m x 4. Comply with BS EN 14144:2003 and BS 14145:2003. For cat C and D waters, at least one of the lifebuoys shall be fitted with a buoyant line and one with a light.
Lifejackets There shall be one life jacket per persons on board plus one spare; these may be inflatable lifejackets providing they are not orally inflatable. Lifejackets shall comply with BS EN 396.
Liferaft Vessels operating in Category D waters shall have a liferaft (open reversible inflatable type (ORIL)). Recommended also for category C waters.
Safety Kit The following shall be on board:
(a) A heaving line
(b) A radar reflector, for non-throw metallic hulls on category C and D waters.
(c) A first aid kit
(d) Two red hand flares and two smoke signals shall be provided for operation on category C & D waters; rocket flares are recommended for category D waters and may be required on the advice of the navigation authority.
Fire Fighting 1 portable fire extinguisher needed next to console (No galley, no accommodation, no engine room, no internal spaces on ScaffFloats)
VHF Radio 1 Portable VHF hand radio
Spill Kit Spill kit to minimise and prevent pollution
Bin bags For general garbage
Bucket With a lanyard for general use or fire fighting
Spotlight With spare batteries
Diver's Knife Mounted in a sheath on the console to cut lines in an emergency or when snagged in a descending lock
Mooring Line Set Of suitable diameter and length (Standard pack 4 x 4m, 4 x 8m)
Mooring Pins & Hammer Minimum 2 pins/stakes and a suitable hammer (where appropriate when operating on river or canal)
Mooring Light Yellow flashing light to mark pontoon to navigation at night (includes spare battery, light activates in the dark)
Boat Hook Accessing any floating objects and MoB recovery
1 x Fog Horn To alert other vessels and as a general alarm
Red Safety Box, Chain & Lock Secure storage for safety equipment when not in use
MoB Ladder To mount with a weak cable tie and swivel clip
MoB Net For recovery of unconscious MoB
Anchor Suitable anchor (min 10kg) with a chain at least the length of the pontoon and a minimum 30m of warp
Navigation Ipad with navigation app, a compass, charts and a local pilot guide.
TPA Thermal protective aid
Locks Chain and lock for safety box
Security Security lights, fake alarm box and fake CCTV
Item Details
Lifebuoys Under 24m x 2. Under 24m x 4. Comply with BS EN 14144:2003 and BS 14145:2003. For cat C and D waters, at least one of the lifebuoys shall be fitted with a buoyant line and one with a light.
Mooring Line Set Of suitable diameter and length (Standard pack 2 x 5m, 2 x 10m, 2 x 30m)
Mooring Light Yellow flashing light to mark pontoon to navigation at night (includes spare battery, light activates in the dark)

Note: This is a full list of safety equipment for Category D waters. Other categories of water will require less safety kit and the equipment supplied will be adapted to the circumstances of the job.

Certification & Compliance

As standard, all our pontoons come with a stability board produced by our Naval Architect, TG20 compliant edge protection and MGN469 compliant safety equipment.
We also supply a specific load assessment and limits for the planned scope of works and additional certifications when necessary or requested:

  • Structural calculations
  • MCA Compliance
  • LOLER checks and inspections
  • Eurocode and British Standards assessments and certifications
  • Category III scaffolding design certification
  • PLA Licensing

Our floats are available only for hire, and we are very strict about this, even though people constantly ask if they can buy the floats. We do this to maintain control over how the system is used. We make sure that every project has a proper design and stability assessment, and that we have overseen or checked the RAMS. Safety is one of the things our customers like most about ScaffFloat. Therefore, it is vital that we maintain our track record, and to do this we need to retain some control.

In terms of regulations, we operate under a range of frameworks

 

The Marine side: We work within the frameworks of several regulatory bodies which cover manning, safety equipment, stability standards and minimum freeboards

  • MCA (the Maritime and Coastguard Agency UK)
  • PLA (the Port of London Authority),
  • IMO (the International Maritime Organization)

Scaffolding Regulations: Most of TG20:13 and other scaffold regulations are not relevant to what we do, but we do use elements of it for things like edge protection.

Lifting:

  • Lloyd's Register Code for Lifting Appliances in a Marine Environment
  • LOLER: All our cranes are tested according to LOLER (Lifting Operations and Lifting Equipment Regulations UK)

Structural Design: If the project requires it, we use the below frameworks to assess structure. On larger projects we can also offer customers an independent Cat 3 check by our partner Richter; this gives our customers reassurance that we have taken a safe and prudent approach to our design and planned method of works.

  • EuroCode EN1993-1-1-2005
  • DNVGL-T-0378
  • BS5975:2019 for temporary works

Gallery

Video

    Please enter your email address below to download the specification for this pontoon




    I agree to sign up to the ScaffFloat newsletter